Filtrine QCP-1.0-ASX Quick Connect Panel/Heat Exchanger

With Heat Exchanger, In-line Filter, Temperature Gauges, Pressure Gauges, Flow Meter

QCP-1.0-ASX
Designed to be used with a Filtrine medical chiller, this compact panel has a built-in heat exchanger which allows switching automatically to a back up source of cooling (either city water or plant chilled water) if a fault condition should occur. Note that the back up cooling will not be available if the water from the chiller stops circulating. For fail-safe protection, specify a back up pump with emergency power in event of a power failure. It also prevents loss of the primary cooling medium (glycol, distilled water, etc) during the switchover.

The panel provides diagnostic information on the Filtrine chiller at a glance. It is housed in an enameled aluminum cabinet with a stainless steel top, bottom and frame and includes a built-in filter in the primary cooling loop to protect the medical equipment. It is installed between the chiller and medical equipment. There is an easy-to-open door in front of the panel that provides access to valves and filter for routine maintenance.
Order Parts Request a Quote Find a Representative
Filtrine Model QCP and QCP-ASX Quick Connect Panel
Filtrine Model QCP and QCP-ASX Quick Connect Panel

Specifications:

Features

Heat Exchanger: Brazed-plate water-to-water heat exchanger removes up to 90,000 BTU/hr from primary cooling solution at a flow rate of 12 gpm using city water or plant chilled water as the secondary coolant. The maximum temperature of the secondary coolant should be at least 5°F colder than the desired primary coolant temperature.

Temperature Gauges: For water entering and leaving equipment are dial-type, in Celsius and Fahrenheit, uses probe for maximum accuracy with no pressure drop.

Pressure Gauges: Dial-type, in psi and bar and generate no pressure drop.

Flow Meter: Analog type with moving indicator in liters and gallons per minute, for minimum pressure drop.

Filter: Bag-type, using 50 micron bag with less than 1 psi pressure drop when new. Filter located inside the panel; includes bypass piping to ensure easy filter element change.

Connections

Chiller Side: 1” FPT [25 mm] copper pipe (other sizes available)
Equipment Side: 1-1/4” FPT [32 mm]
Service Drain: 1/2” FPT [12.5mm]

Cabinet

Constructed of enameled aluminum panels with stainless steel top and sides. Panel is removable without tools for access to valves and filter.

Dimensions

50″ [1,270 mm] W x 14″ [357 mm] D x 36″ [915 mm] H

Voltage

115/60/1 supplied from Filtrine chiller

Weight

Unit Weight: 300 lbs. [135 Kg]

Downloads

Download All

For medical chiller model specification sheets, contact cool@filtrine.com or your local chiller sales representative.

Related Applications

Medical

Employing the signature Filtrine chiller storage-type cooling tank, Filtrine has been chilling medical equipment for over 20 years and is considered a leader in the industry. Starting with Picker, Filtrine now designs medical chillers for Elekta, GE Healthcare, Hitachi Medical Systems, Mevion Medical Systems, Philips Healthcare, Siemens, Siemens Petnet Solutions, Varian Medical Systems, and more.